The smallest, lightest and brightest XGA LCD projector, the new Sanyo PLC-XW65 weighs in at only 1.6 kg. Suitable for mobile professional or travellers, the projector also features automatic keystone correction, automatic input signal detection, adjustable color mode, and more.
Small enough to carry with one hand |
Offers simple setup |
Automatic keystone correction |
Automatic input signal detection |
Micro-portable projector, net weight only 1.6 kg |
Brightness 2,500 ANSI lumens |
Contrast 500:1 |
Resolution in Pixels 1,024 x 768 (XGA) |
Wide angle lens with 1.2 optical zoom allows flexible positioning (1.33 - 1.62 : 1) |
Key Lock function, Pin Code Lock for security |
Industry’s smallest and lightest* body (264.0 (W) x 55.0 (H) x 188.0 (D) mm and 1.6 kg) offers great portability. (not including protruding parts)
Brightness of 2500 lumens
With the compact, light-weight body, the projector provides a brightness of 2,500 lumens (PLC-XW65),2000 Lumens (PLC-XW60). This allows for clear projection even in a small meeting space or conference room.
1.2x Optical Zoom
PLC-XW60 is equipped with a zoom lens that allows screen size adjustment. The optical zoom hardly deteriorates the image quality. The short-focus type lens allows large screen image projections with a short throw distance. PLC-XW60 enables 100- inch screen projection at the shortest distance of 2.7 m.
Auto Vertical Keystone Correction
The PLC-XW60 and PLC-XW60 automatically compensates for keystone picture distortion.
NOTE: Correction range varies depending on operation settings such as lens shift ratio, lens zoom magnification and so on. On-screen image size after correction is smaller than that of original. The correction range is up to 20 degrees.
Wall or Blackboard (Green) Projection
In addition to the black board (green) mode, the PLC-XW65 and PLC-XW60 provides four color (red, blue, green, yellow) board modes, enabling easy projection* without using an ordinary screen.
* The projected image color may be different from input signal color.
Easy Setup
PLC-XW60 provides "Auto Setup Function" that corrects keystone shape distortion by searching for an input signal and detecting projector incline, reducing setup time.
Furthermore, the "Screen Guidance Function" allows projector set up according to the displayed guidance. This function provides beginning users an easy guide to projection.
Two D-Sub
The PLC-XW65 and PLC-XW60 have two D-sub input terminals. One of these can be switched and used as a monitor output terminal.
Power On Startup
The power turns on as soon as you connect the power cord. No need to press any buttons on the remote control or projector
Power Off & Go
No need to wait for the projector to cool down. The power cord can be disconnected right after your presentation.
|