Excellent Image Quality

A Full 4,500/4,000 Lumens of Brightness and Contrast of 2,000:1
The 300-watt AC lamp unit features an efficient light focusing reflector. Using only a single lamp unit, the PT-DX500E achieves 4,500 lumens of brightness, while the PT-DZ570E and PT-DW530E offer 4,000 lumens. All models boast a high contrast ratio of 2,000:1.

RGB Booster Significantly Improves Colour Reproduction The RGB Booster achieves high image quality with levels of colour reproduction and brightness that make each colour stand out. It combines Panasonic’s proprietary Vivid Colour Control technology with a Lamp Modulation Drive System for a 1-chip DLP™ projector that produces bright and vivid colours. • Vivid Colour Control This unique control technology optimises the use of the colour segment areas of the colour wheel. It increases the brightness of each RGB colour by minimising the unallocated portions between the colours, to achieve truly vivid colouring. • Lamp Modulation Drive System With the advanced lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue and white segments of the colour wheel separately. Because the actual light output is controlled in relation to each colour segment, light usage is optimised, and colour balance is obtained without lowering the brightness. This results in bright, vivid images with increased colour fidelity.

Daylight View Premium for Better Colour Perception*1
This function corrects the image quality to project sharp, clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a realtime adjustment function optimises sharpness and brightness according to the surroundings. This adjustment function also works together with the Detail Clarity Processor 3 to enhance the realism and vividness of projected images. This makes images easier to view and offers high contrast.

Detail Clarity Processor 3 Brings Depth and Clarity to Details
The frequency of the video signal is analysed for each scene, and distribution data is extracted for the ultra high, high, medium and low-range frequencies. This unique Panasonic image correction circuit optimally enhances each area of the screen. High-precision detection is applied from 2-dimensional horizontal/vertical data to produce more natural, lifelike images with high definition.

Waveform Monitor Function (PT-DZ570E)
When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ570E, you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer.

DICOM Simulation Mode*2 This imaging mode is similar to DICOM Part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. It also allows information to be shared by many viewers on a large screen, such as during conferences or training courses. Full HD-ready WUXGA Resolution (PT-DZ570E) In response to the increasing popularity of widescreen image viewing, including Blu-ray content, the PT-DZ570E features native WUXGA resolution for high-definition viewing. This brings you lifelike projection of intricate, highly detailed images.

Advanced Technologies for Excellent Image Quality
• 3D colour management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control

Improved Reliability and Reduced Maintenance

Newly Designed Original Cooling System
The cooling system is newly designed to optimise the airflow inside the unit. As a result, it offers better cooling efficiency and allows the projector to be used in ambient temperatures up to 45°C (113°F)*3.
Lamp and Lamp Air Filter Replacement

Cycle of 2,000 Hours*4
The new cooling system combines with a dust-resistant design based on a sealed optical block to achieve a lamp and lamp air filter replacement cycle of 2,000 hours*4. This greatly reduces maintenance hassles.

Easy Lamp Replacement
For easier maintenance, you can replace the lamp from the rear. The lamp is easily replaced even after the projector is installed on the ceiling.

Quiet, 29 dB*5 Operation
An original cooling system enhances the compact body and enables the projector to operate at a quiet 29 dB.*5

Web Browser Control over a Wired LAN
The PT-DZ570 Series can be easily operated remotely over a LAN, because it is done using the computer’s Web browser. Furthermore, the projector sends an email message to notify the operator when an error has occurred, or a lamp needs to be replaced.

Multi Projector Monitoring & Control Software Ver. 2
Panasonic’s original freeware “Multi Projector Monitoring & Control Software Ver. 2” allows the user to control and monitor multiple projectors at the same time over a wired LAN. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.

Installation/ Operation Flexibility

H/V Lens Shift and 2x Zoom Lens
In new installations, the horizontal/vertical lens shift lets you accommodate a wide range of room sizes and shapes. And when replacing existing projectors, the 2x zoom greatly enhances your ease of installation and can reduce costs by permitting the use of existing mounting positions and cablings.

Flexible Angle Setting The unit can be rotated 360° vertically. This means you can install it at any upand-down angle you wish to accommodate different installation conditions. Lens-centred Design A lens-centred, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

Multiple Terminals
Interfaces include a DVI-D and HDMI inputs. The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing a previous Panasonic model. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector.

Side-by-Side Function*6
The PT-DZ570E/DW530E can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right. Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.

Easy Wireless Projection from Multiple PCs (Optional)
The optional Wireless Module ET-WM200E allows the PT-DZ570 Series to operate wireless projection for a smooth, hassle-free presentation. You can make the settings for wireless connection quickly and easily using Wireless Manager ME 5.5 software. When the presentation is finished, Wireless Manager restores the PC to its previous LAN settings, so the PC is ready to reconnect to your LAN. Functions include Live mode and Multi-Live mode. In Live mode, the image projectedis identical to the image seen on the PC screen. In
Multi-Live mode, you can wirelessly connect with multiple PCs.

Eco Management Functions
A number of functions are provided to reduce power consumption. They adjust the brightness according to the ambient light conditions and reduce the lamp power when there is no signal input or the projector is in the AV Mute mode.

Other Valuable Features
• Direct Power Off
• Scheduling function
• Customisable function button
• 15m (49ft) long-range wireless remote control
• Security features: user password, text superimposing and logo (default or original)
• HDTV compatibility
• Variable audio output for the external speaker system
• AV mute for image/sound muting
• Selectable 9-language on-screen menu
• Built-in closed caption decoder

Each Panasonic projector is produced by a vertically integrated production process, which extends from R&D to manufacturing, at the Panasonic factory in Japan, under strict quality control. This ensures stable, top-quality performance in every product.