Vivid Picture Quality with High Brightness
RGB Booster Significantly Improves Colour Reproduction
The RGB Booster achieves high image quality with levels of
colour reproduction (up to 145% that of conventional models)
and brightness that make each colour stand out. It combines
Panasonic's proprietary Vivid Colour Control technology with a
newly engineered Lamp Modulation Drive System for a 1-chip
DLP™ projector that produces bright and vivid colours.
Vivid Colour Control
This unique control technology optimises the use of the colour
segment areas of the colour wheel. It increases the brightness of
each RGB colour by minimising the unallocated portions between
the colours, to achieve truly vivid colouring.
Lamp Modulation Drive System
With the new lamp modulation technology, the projector is now
able to control the lamp intensity for each of the red, green, blue,
and white segments of the colour wheel separately. Because the
actual light output is controlled in relation to each colour segment,
light usage is optimised and colour balance is obtained without
lowering the brightness. This results in bright vivid images with
increased colour fidelity.
High Brightness
with New AC Lamp
Our newly-developed 300-watt AC
lamps are used in the
PT-DW6300ES/D6000ES. The
high-efficiency light convergence
technology and the colour wheel
work together to achieve the high
brightness of 6,000 lm for the
PT-DW6300ES and 6,500 lm for
the PT-D6000ES. Clear, crisp
images are reproduced even in
bright rooms.
Detail Clarity Processor Brings
Depth
and Clarity to Details
This advanced image-processing circuit analyses the video
signal frequency range for each scene by extracting data on
the distribution of high, mid, and low-frequency
components, and brings out fine details accordingly. The
resulting images have a more natural, three-dimensional
appearance with crisp, clear detail. |
 |
System Daylight View 2 for
Enhanced Colour Perception
Image details are less clear when a projector is used in a
room with the lights on. Panasonic's System Daylight View 2
improves brightness perception by adjusting sharpness,
gamma curves, and colour corrections. This produces
crisper, more stunning images with vivid colours even under
bright conditions. |
 |
Easy Maintenance and Superior Reliability
Micro cut filter
A filter in the air intake section traps dust particles that are 10 microns* or larger. By capturing approximately 7 times as much dust as conventional filters, it guards against optical blocks and reduces the penetration of dust into to the interior to provide stable operation by, for example, preventing drops in brightness. *10-micron dust = lint, pollen, etc.
Dustproof design with sealed optical block
The effect of dust has been minimised by completely sealing the optical block.The dustfree design helps ensure that this DLP™ projector will continue to deliver crisp, sharp, high-resolution images over an extended service life.
Flexible system installation
Lens-centred design
A lens-centred, symmetrical design provides flexible system layout, eliminating the need for any special considerations when planning the installation site.
Horizontal/Vertical lens shift
A wide adjustment range of the horizontal/ vertical lens shift assures distortion free images and adds convenience and versatility. (Horizontal : manual, Vertical : powered)
Optional lenses for various venues
Five optional lenses with different throw distances are available in addition to the supplied lens. These powered zoom/focus lenses enable the projectors to perform superbly in an array of projection environments.
Multiple terminals
The PT-D4000E has an array of terminals-two RGB inputs including a 5-BNC connector, serial in/out, one S-video inputs, two remote in, one remote out, DVI-D and control capability-to support a broad range of projection needs HDCP. (High-Bandwidth Digital Content Protection) compliant. Using the serial terminal(RS232C),it is also possible to connect and operate AMX and Crestron control systems with ease.
Web browser control/monitoring
and e-mail message alert Anybody can operate the PT-D5700E by remote control or monitor its status over a LAN network, because it is all done using the computer’s familiar Web browser. Furthermore, the PT-D5700E sends an E-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced.
Control panel and wireless remote control
The rear control panel allows for easy operation when the PT-D4000E is set on a desk or floor. New wireless remote control with longer transmission capacity of 30 m.
PJLink™ compatibility
The LAN terminals support PJLink™ class 1 connection. Control with the same specifications is also possible when used in a multi-projector system with projectors of another brand.
Easy lens replacement
The PT-D5700EL uses the bayonet system, so lenses attach and detach with one-touch ease.
|
