| Buyers Guide
Projectors
Screens
Accessories
|
| NEC LT25G Digital Projector |
|
 |
|
 |
For the current NEC Range Click here |
 |
| High brightness of up to 2200 ANSI lumens with a compact, lightweight, 2.0 kg body |
| Although it has a highly transportable lightweight body weighing 2.0 kg, it achieves high brightness of 3000 ANSI lm, which is sufficient for use in a bright room. (This is for the LT35. The brightness is 2600 ANSI lm and 2200 ANSI lm for the LT30 and LT25, respectively.) |
|
| Auto Focus Function by the focus sensor |
 |
The focus of the projected image is adjusted automatically by measuring the distance between the focus sensor and the screen. This function activates immediately whenever the power is turned on, the zoom function is adjusted or the position of the main unit is changed, so the projector can be set up easily without focusing every time. |
|
|
| The projector can be put away quickly with Direct Power Off function |
| The projector can be turned off , even when projecting an image, using a power strip equipped with a switch and a breaker. Also, the power cable can be removed immediately after turning off the projector, so that the user can put the projector away immediately after terminating a conference or class. |
|
| Wall Colour Correction enables vivid images even without a screen |
 |
Without a screen, the projected images may be affected by the colours of the wall or blackboard. This projector has built-in colour correction for projecting images on a coloured wall or blackboard, so that the colour tones of the projected images can be approximated to those projected on a white screen. The following eight colour options are available as user selections: blackboard, blackboard (gray), light yellow, light green, light blue, sky blue, light rose and pink. |
|
| Auto Vertical Keystone Correction adjusts the trapezoidal distortion to correct the projected image |
 |
If the position of the screen is too high or low, the projector must be installed at an angle, resulting in trapezoidal distortion of the projected images. The acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically to project square images. (+/- 16 degrees from the projection angle) The user can set up the projector very quickly and easily since it is not necessary to correct it manually. |
|
High performance in a lightweight, compact projector featuring a variety of functions for bright, vivid images.
- Ultra Portable, High Brightness Projector features DLP T technology
- Lightweight at 2.0 kg
- Auto Focus Function
- Direct Power Off Function
- Wall Colour Correction
- Auto Vertical keystone Correction
- Streamlined cabinet in a pearl-white finish
|
|
|
Specifications
| Model Name |
|
LT35 |
LT30 |
LT25 |
| DMD Panel *1 |
|
1chip DMD reflection type, 0.7 inch 1,024 x 768 pixels, Aspect Ratio 4 : 3 |
| Lens |
Manual Zoom (Renge 1 to 1.2) (f=25.7mm to 30.8mm) |
| Auto Focus (effective range: 1.4m to 5.5m*2)/Power focus |
| Lamp |
Normal Mode |
220W AC |
200W AC |
200W AC |
| |
Lamp Eco Mode |
170W |
170W |
170W |
| Lamp Life |
Normal Mode |
2,000H |
2,000H |
2,000H |
| |
Eco Mode |
2,500H |
2,500H |
2,500H |
| Power Consumption |
Normal Mode |
280W |
260W |
260W |
| |
Eco Mode |
230W |
230W |
230W |
| |
Standby Mode |
8W |
8W |
8W |
| Input Current |
|
3.1A to 1.4A (100 to 240V AC) |
2.8A to 1.3A (100 to 240V AC) |
| Light Output |
Normal Mode |
3,000 ANSI lumens |
2,600 ANSI lumens |
2,200 ANSI lumens |
| |
Lamp Eco Mode |
2,300 ANSI lumens |
2,200 ANSI lumens |
1,900 ANSI lumens |
| Contrast Ratio (White/Black) |
|
1,600 : 1 |
1,500 : 1 |
1,500 : 1 |
| Quietness |
Normal Mode |
40dB |
37dB |
37dB |
| |
Eco Mode |
33dB |
33dB |
33dB |
| Image Size |
|
30 inch to 300 inch diagonal |
| Projection Distance |
|
1.1m to 13.3m |
|
|
| Projection Angle |
|
10°to 12° |
|
|
| Maximum Resolution |
|
SXGA+ (1,400 x 1,050) With scaling technology |
| Synchronization Range |
Horizontal |
15kHz to 100kHz (RGB:24kHz or over) |
|
| |
Vertical |
50Hz to 85Hz |
|
| Video Bandwidth |
|
RGB: 100MHz |
|
|
| Input Terminals |
|
D-sub |
|
|
| |
|
S-vid |
|
|
| |
|
Composite |
|
|
| |
|
Component (shared with Dsub) |
|
|
| Control |
|
RS-232 |
|
|
| Built-In Speaker |
|
1W Monaural |
|
|
| Keystone Correction |
Vertical |
Automatic/Manual max±16° |
|
| Environment |
Operational Temperatures |
5°C to 40°C, 20 to 80% Humidity (Non-Condensing)
(Eco mode selected automatically at 35°C to 40°C) |
| |
Storage Temperatures |
-10°C to 50°C, 20 to 80% Humidity (Non-Condensing) |
| Power Requirement |
|
100 to 240V AC, 50Hz/60Hz |
| Regulations |
For United States |
UL Approved (UL 60950-1), Meets FCC Class B Requirements |
| |
For Canada |
UL Approved (CSA 60950-1), Meets DOC Canada Class B Requirements |
| |
For Australia/New Zealand |
Meets AS/NZS CISPR.22 Class B |
| |
For Europe |
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3),
Meets Low Voltage Directive (EN60950-1, TUV GS Approved) |
| Net Weight |
|
2.0kg |
|
|
| Dimensions (WxHxD) |
|
260mm x 89mm x 208.5mm (Not Including Protrusions) |
Supplied Accessories
|
Carry Bag |
Remote
|
|
|
| Optional Accessories |
|
|
|
|
Premium VGA Monitor Cable (15HDM/15HDM) |
Aus Wide Delivery: $15
|
Heavily shielded coaxial RGB cable giving you a crisper display at higher resolutions!
| . |
Features UL Approved Cabling |
| . |
Filters included on both ends cutting down on noise |
| . |
Maintains stronger signals using a shielded cabling run. |
| . |
Comes in 15pin D-sub format with Male to Male conectors |
| |
|
|
|
|
|
Bonus Projector screen Only available with purchase of a projector |
Insured Delivery: $6extra
Pick Up Avail.
|
|
84inch 4:3 White Pull Down screen
- High quality Matt white screen material with black border Ceiling or wall mountable
- Easy Install Gloss white casing
- 1650mm x 1220mm (WxH) Image
- Case length 1790mm |
|
|
|
Extended Warranty
|
Program Coverage:
- LCD & DMD pixels are covered only as per original manufacturer's pixel terms & conditions
- Does not cover Cords, Power Adapter
- Does not cover consumable items such as projector globes |
| 5 Year On-Site (Extraction & Reinstall) Extended Warranty | $339 |
| 4 Year On-Site (Extraction & Reinstall) Extended Warranty |
$299 |
| 3 Year On-Site (Extraction & Reinstall) Extended Warranty |
$250 |
| |
|
| Buy your new LT25 projector now, Contact Us today! |
|
|
|
