XEED WUX5000 Technical Specifications
Display system
RGB liquid crystal system
Optical system
Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism
Type
Reflective liquid crystal panel
Size / Aspect ratio
0.71" x 3 / 16:10
Drive system
Active matrix system
Number dots / Total Number dots
2,304,000 (1920 x 1200) x 3 panels / 6,912,000
Zooming
Electric
Focusing system
Electric
Lens shift
V: -15% - +55% H: ±10%
Light source
330-NSHA 336 / 264W
Number of colours
16,770,000 colours (full colour)
Brightness
5,000 lumens (during presentation)
Contrast ratio
1000:1 (Full white: Full black, during presentation)
Ratio of brightness at periphery to center
Ratio of brightness at periphery to center
88% (during presentation)
Speaker
5W monaural x 1
Maximum input resolution
1920 x 1200 dots
Analog PC input
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / SXGA / WXGA / XGA / SVGA / VGA (Scan frequency: Horizontal 15 - 75kHz, Vertical 50 - 85Hz)
Digital PC input
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / SXGA / WXGA / XGA / SVGA / VGA
Component input
1080p, 1080i, 720p, 576i, 576p, 480i, 480p
HDMI input
1080p, 1080i, 720p, 576p, 480p
DVI-D IN terminal
Digital PC (24-pin DVI connector)
HDMI IN terminal
HDMI (deep colour)
ANALOG PC / COMPONENT IN terminal
Analog PC, Component (mini D-sub 15-pin)
CONTROL terminal
RS-232C (D-sub 9-pin)
AUDIO IN Terminal
Audio signal (3.5ø stereo mini jack x 2)
AUDIO OUT Terminal
Audio signal (3.5ø stereo mini jack)
LAN terminal
Network connection (RJ-45)
Digital PC
TMDS (Transition Minimized Differential Signaling)
Analog PC
0.7Vp-p, positive polarity, impedance = 75O
Horizontal / vertical synchronization: TTL level, negative or positive polarity
Composite synchronization in G signal: 0.3Vp-p,
negative polarity, impedance = 75O
Component video
COMPONENT: Separate Y Cb / Pb Cr / Pr signal
Y: 1Vp-p, negative synchronization, impedance = 75O
Cb / Pb: 0.7Vp-p, impedance = 75O
Cr / Pr: 0.7Vp-p, impedance = 75O
Audio
Impedance = 47kO or more
Noise (normal mode / silent mode)
40db
Operating temperature
5°C - 35°C
Power supply
AC100V - 240V 50 / 60Hz
Normal mode
450W
Standby
1.7W
Standby with LAN OFF
0.35W
Dimensions (W x D x H)
380 x 430 x 170mm
Weight
8.5kg
Accessories
Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
XEED WUX5000
Specifications are subject to change without notice.
*1 When standard zoom lens is used
When standard zoom lens is used
99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteristics of the LCD panel.
Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
This projector conforms to JIS C 61000-3-2 |